Switch glass touch Z-Wave More MCOHome
The switch MCOHome Z-Wave Plus MH-S412-EU can switch between the 2 connected loads, either manually as a switch with classic, or remotely via the wireless protocol Z-Wave.
The switch MCOHome Z-Wave Plus MH-S412-EU can be included in the Z-Wave network and then be controlled by a controller or a remote controller Z-Wave.
The switch MCOHome Z-Wave Plus MH-S412-EU can control any type of load, either a light or an electrical device.
The switch to the MH-S412-EU supports the association (Group 1). Thus, it is possible to combine up to 5 other devices to control them manually from the switch or the Z-Wave controller.
The switch is also equipped with an indicator LED that shows its status.
Attention, this switch requires the neutral to work. A flush-mounting box depth 50 mm and a diameter of 67mm is recommended for the installation
Features switch MCOHome Z-Wave Plus MH-S412-EU :
-
Control two lights or appliances remotely
-
Installed in place of an existing switch
-
Function ON / OFF
-
Supports the association (Group 1 and Group 2)
-
Controls two loads locally
-
Status LED
-
Finish glass, modern design
-
The touch buttons
-
Type of module : Receiver Z-Wave
-
Color : White
-
Power Supply : 230 V, 50 Hz
-
Wiring : 3-wire, neutral required
-
Maximum power : 5A (1100W) for each channel
-
Frequency : 868,42 Mhz
-
Range : up to 30 m
-
Dimensions : 86 x 86 x 43 mm
-
Display: blue LED
