Module ZMNHND1 Qubino dry contact..
Module ZMNHND1 Qubino Z-wave More.
Garanties sécurité
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
Module home automation Z-WAVE MORE QUBINO ZMNHND1 to order a circuit with a potential of up to 2300 W to be potential-free.
This module QUBINO ZMNHND1 allows you to control an electrical circuit if the puissace dial-up does not exceed 2300 W.
The module QUBINO ZMNHND1 allows you to control ON / OFF mode with outputs potential-free.
Features:
Order a lighting/remote camera
Installs behind existing switch
Function ON/OFF
Output potential-free (dry contact)
The smaller module 1 output in the world
Case design specially designed for ease of installation (ease of mounting of the cables), and tested by electricians professionals
Very low power consumption with less than 0.4 W
Operating temperature -10 to 40°C
Connector for temperature sensor analog
Integrates the chip Z-Wave 500 series
Communication 250% faster compared to devices Z-Wave standard
Optimization of radio range
2 binary inputs allow you to connect additional devices such as sensors, buttons, bistable or push, etc
Power supply : 110 - 230 VAC ±10% 50/60Hz, 24-30VDC
Power consumption : 0.4 W
Rated current of AC output (resistive load) : 1 X 10A / 230VAC
Rated current of DC output (resistive load) : 1 X 10A / 30VDC
Power of the circuit on the AC output (resistive load) : 2300W (230VAC)
Power circuit DC output (resistive load) : 240W (24VDC)
Frequency of radio emission : 868.42 MHz, Z-Wave
Range : up to 30 m indoors (depending on surrounding materials)
Measuring range temperature sensor digital (sensor sold separately) : -50 ~ 125°C
Operating temperature : -10 ~ 40°C
Space required for installation : Ø ≥ 60mm
Dimensions (W x H x d) : 41,8 x 36,8 x 15,4 mm
Weight : 28g
Certifications : CE, RoHs
Compatible eedomus Yes
Compatible With Vera 3/Lite Yes
Compatible with Fibaro HC Lite Partially
Compatible with Fibaro HC2 Partially
Compatible with ZIPABOX Partially
Compatible Controller Lite Yes
Compatible Controller Pro Yes
Module Z-wave More ZMNHVD1 Qubino dimmer 0-10V.
Module Qubino ZMNHVD1 Z-wave More.
Remote control 16-channel white CHACON DI-O 54761.
Compatible with the range of DIO / MYFOX.
Sensor smoke FIBARO FGSD-002 self-powered.
Sensor with data logging that can be used to survey fire!
In accordance with the standard EN 14604:2005.(NF)
Module ZMNHND1 Qubino dry contact..
Module ZMNHND1 Qubino Z-wave More.