

Dahua VTO2211G-WP - SIP WIFI Video Intercom
Dahua VTO2211G-WP -SIP WIFI video intercom
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
Dahua VTO2211G-WP -SIP WIFI video intercom
SIP WIFI intercom station
You must have at least a WIFI level of 50% in clear and overcast weather at the installation point
Features Dahua VTO2211G-WP -SIP WIFI video intercom :
-
Integrated processor
-
Built-in Linux operating system
-
Operation by mechanical buttons
-
H.264 video compression
-
1/2.8" CMOS Image Sensor, 2 Megapixel
-
Low lighting
-
Infrared lighting for night vision
-
Infrared light compensation
-
Day / Night with ICR filter
-
Viewing angle 125°(H), 72°(V), 142°(D)
-
WDR 120dB
-
3D noise reduction
-
Video sensor
-
Stream 1: WVGA/720P/D1 (25/30 fps)
-
Stream 2: CIF/WVGA/QVGA/1080P/D1 (25/30 fps)
-
Compression audio G.711Mu, G.711u, PCM
-
Two-way audio
-
1 audio input
-
Incorporates a speaker
-
Echo suppression and digital noise cancellation
-
Automatic image capture (can only be enabled on indoor monitors)
-
Configuration Web
-
IC Card Reader
-
Up to 10000 cards
-
Map reading range: 3~5cm
-
Unlock Modes: Map, App, Indoor Monitor
-
1 RS485 port
-
1 electrical holding port
-
1 alarm input / 1 output
-
1 power outlet
-
1 output button port
-
1 door status detection port
-
1 door control port (NC default)
-
Self-protection
-
Incorporates IEEE802.11b/g/n WiFi, 2.4GHz
-
10/100M network interface
-
Network Protocol: SIP, P2P, IPv4, DNS, RTSP, RTP, TCP, UDP
-
Onvif Compatibility
-
DEGREE OF PROTECTION IP65 (requires silicone seal)
-
Polycarbonate and acrylic box
-
Surface installation
-
Power Supply: 12V DC, 1A
-
Supports standard PoE
-
Consumption: ≤1W (sleep), ≤7W (operation)
-
Supports standard PoE
-
-30C~+60°C operating temperature
-
10%~90% relative humidity (non-condensing)
-
Dimensions: 100 (W) x 150 (H) x 24.8 mm
-
Weight: 490 g