- Out-of-Stock

Allows to measure the consumption of your habitat.
Energy meter for three-phase system.
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
The energy meter AEON LABS ZW0953C60A is composed of three ammeter clamps that attach to the phase of the circuit to be measured.
The scope of the ZW0953C60A is 100 metres away. It allows the measurement of the watts consumed instantly as well as Kilo Watts per hour.
The energy meter Aeeon Labs ZW0953C60A must be integrated in an installation Z-Wave controlled by a set-top box home automation Z-wave for the reassembled information.
See energy consumption in real time (in watts and kWh)
Overview of the electricity consumption of your house
Identify devices that require
Change your habits and make savings
Ease of installation
Scope of the antenna-optimized - up to 100m in free field
Integrates the chip Z-Wave 500 series
Communication 250% faster compared to devices Z-Wave standard
Supports frames exploration Z-Wave. Repeat messages to Z-Wave.
Power sector
Improved accuracy compared to the version G1
IP43 Protection to withstand most weather conditions outdoors
Use in an installation, three-phase
Comes with 3 ammeter clamps
Model : ZW095-HAD 3P4
Power supply : 230VAC, 50Hz, 10mA
Frequency : 868,42 MHz
Range : up to 100 m in free field
IP Protection : IP43
Maximum diameter of cable : 10mm
Accuracy : 1%
Maximum current : 60A
Dimensions : 108 x 67 x 30mm (L x w x H)
Certification : FCC, CE, ROHS, C-Tick