
FGSD-002 - Fibaro sensor smoke
Sensor smoke FIBARO FGSD-002 self-powered.
Sensor with data logging that can be used to survey fire!
In accordance with the standard EN 14604:2005.(NF)
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
The Fibaro Home Center 3 Lite home automation box is the lighter and smaller version of the world's most advanced smart home management unit.
The Fibaro Home Center 3 Lite home automation box was designed based on the solutions used in the Home Center 3 platform.
The Fibaro Home Center 3 Lite home automation box can be connected to other Z-Wave devices that you can use to control electronics and appliances, lighting, blinds, heating, alarm or sprinkler system - with a single button, gesture or word. The Home Center 3 Lite is recommended for apartments and small home automation installations.
Wireless communication using Z-Wave 700 technology
Suitable for small houses (up to 100 m2) and apartments
Support up to 40 Z-Wave devices
Support up to 20 scenes
Support 1 IP camera
Support up to 5 plugins and 10 quick apps
Efficient hardware architecture
Solution designed for small building automation systems
Quick setup
Ability to create automations - block and LUA scenes
Highest data security
Subtle design
Compatible with Amazon Alexa, Google Assistant and IFTTT
Processor: ARM Cortex A7 900Mhz single core
Operating memory: 512MB DDR3L
Hard Disk: 4GB EMMC Flash
Power supply: 5V DC, 1A (power supply included)
USB port: 1 (2.0)
Network interface: Wi-Fi (802.11 b/g/n/a/ac)
Radio protocol: Z-Wave (700 series)
Radio frequency: 868.42MHz EU
Range: up to 200 m (depending on building structure)
Dimensions: 178 x 110 x 31mm
Sensor smoke FIBARO FGSD-002 self-powered.
Sensor with data logging that can be used to survey fire!
In accordance with the standard EN 14604:2005.(NF)
FIBARO FGD-212 dimmer module ZWAVE-PLUS.
This module home automation FIBARO FGD-212 Z-WAVE+ allows you to command a lighting circuit with dimming.
It can also connect to a intérrupteur existing.
Detector flood detector FIBARO FGFS-101-ZW5 self-powered.
Detector flood detector and temperature Z-wave More.
Color brown.
The FIBARO Button FGPB-101 allows you to control the devices from your Z-Wave network and perform various
scenes defined in the system FIBARO.
Blue color.
Allows you to control the devices from your Z-Wave network and perform various
The FIBARO Button FGPB-101 allows you to control the devices from your Z-Wave network and perform various
scenes defined in the system FIBARO.
Red color.
The FIBARO Button FGPB-101 allows you to control the devices from your Z-Wave network and perform various
scenes defined in the system FIBARO.
Color white.
FGS-213 micro-module Z-WAVE MORE FIBARO
Module FGS-213 allows you to command a lighting circuit in ON/OFF mode.
It can also connect to a intérrupteur existing.
Z-wave Plus type E plug for France.
The FIBARO KeyFob FGKF-601 is a remote Z-Wave More .
The FIBARO KeyFob FGKF-601 equipped with 6 buttons to run various scenes and actions.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Color brown.
The FIBARO Button FGPB-101 allows you to control the devices from your Z-Wave network and perform various
scenes defined in the system FIBARO.
Color white.
Replaces the Fibaro FGR-223 module
The NOUS A1Z Zigbee 3.0 smart plug allows remote control and monitoring of energy consumption via smartphone and voice assistants, with easy integration with a Zigbee gateway.
FIBARO FGD-212 dimmer module ZWAVE-PLUS.
This module home automation FIBARO FGD-212 Z-WAVE+ allows you to command a lighting circuit with dimming.
It can also connect to a intérrupteur existing.
Pack thermostat and thermostatic valve