Garanties sécurité
(à modifier dans le module "Réassurance")
Politique de livraison
(à modifier dans le module "Réassurance")
Politique retours
(à modifier dans le module "Réassurance")
The addition of an SPCE650 transponder on the X-BUS of an SPC control panel extends the system with 8 wired inputs and 2 additional configurable relay outputs.
The operation of these inputs and outputs is identical to those located on the motherboard of the plant.
Each input can be wired in different modes (No' Nf' balanced 1R' balanced 2R' balanced 3R).
The 2 outputs are PSTN relay outputs free of potential.
The transponder is delivered in a self-protected box when opened and torn off.
It is 'among other things' equipped with an LED and a buzzer to easily locate it on the equipped site.
Expansion box 8 wired zones and 2 relay output
Number of entries on the map: 8
Number of relay output on the board: 2 x 30 Vdc /1A Max
Standard: NFA2P Grade 3
Standards: EN50131-1 / EN50131-3, Grade 3, Class II
Balancing resistors: double 4k7 (default), many possible configurations including NO/NF
Laison interface with the control panel: X-BUS (1 input and 1 output)
Self-protection on opening and tearing
Integration into logical functions
More than 22 configurable input types
More than 24 combinations of balancing resistors
Fully configurable outputs
Operating Voltage: 9.5~14V DC
Consumption: 12 V DC at 80 mA max.
Operating Temperature: -10°~50°C
Dimensions: 20 x 15.3 x 4.7 cm
Weight: 350g
This alarm is not dependent on any Cloud!
This alarm does not depend on any Cloud!
Alarm siren wired d' inner SIRYNX ALTEC for central alarm wired.
Delivered with battery.
Replacement battery for alarm, backup system...
Replacement battery for alarm
Replacement battery for alarm
