- Out-of-Stock

(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
The adapter Eutonomy euFIX S222NP is used to install the module Fibaro® Switch FGS-222 on a rail of type DIN TH35 in the electrical panel.
The adapter Eutonomy euFIX S222NP consists of a housing and an electronic card on which the module Switch FGS-222 is mounted.
The dimensions of the case are appropriate for a standard rail DIN TH35/TS35.
The e-card contains a set of screw terminals, where all the wires (power, signal input and output, command buttons) can be connected safely.
Adapter DIN to Fibaro Switch FGS-222 without push buttons
Used to install the module Fibaro Switch FGS-222-rail type DIN-TH35 / TS35 in the electrical panel
Location free on the label to identify the line controlled
Supply voltage: 230 V AC +/- 10%, 50-60Hz
Power load: max 6.5 A per channel, 10A total
Dimensions: 34,8 x 87,3 x 64,7 mm
Width in units TE: 2 TE coolers
Cross Section of the conductor of wire : max. 2.5 mm2
Maximum length of the wires connected to the inputs Sx, S1, S2: 20m
Operating temperature: 0 ° C to +50 ° C
Relative humidity: ≤90%, no condensation
Guidelines:
LVD 2014/35 / EC
RoHS 2011/65 / EU